Full Automatic Drop Test Equipment , Single Wing Design Lab Drop Tester
Drop Test Equipment Features:
- full-automatic single-wing design, electric contraction arm, 9.8m/s2 drop acceleration, to ensure the free separation of the cargo carrier and the packaging specimen, to realize the free drop of the packaging specimen, with small impact vibration, stable and reliable, and to truly complete the surface, edge and Angle drop test
- with electric reset, electronic drop and electric lifting device, easy to use
- equipped with digital display height display and decoder for height tracking, so as to accurately give the drop height of the product, the error from the preset drop height is no more than 2% or 10mm.
Drop Test Equipment Specifications:
| Model | TZ-HG1500 |
| Height range | 300~1500mm |
| Height display | digital |
| Drop height error | ±10mm |
| The maximum weight of the product | 60Kg |
| The maximum size of the product | 1000×800×1000mm |
| Impact panel size | 1600×1100×20mm |
| The appearance of the machine | 1600×1100×2230mm |
| The size of the control box | 300×350×1100mm |
| Drop mode | surface, edge, Angle |
| The motor power | 1.1KW |
| Net weight | 600 kg |
Ista-1a /2A external tank drop test
Drop test of external container, usually using ista-1a or 2A standard established by iata.Most customers will choose the standard of 1A for testing. The test procedure of 1A and 2A is basically the same, but the drop height will be different.
Drop test procedure
1. First, check the product to make sure that the product being tested is a good product, including appearance and function.
2. Repackage to the original packing state, including the packing belt of the outer case (if any).
3. Choose the right floor, which must be smooth and hard.Such as concrete floor, iron plate, etc.
4. Test in the following order:
| Test Sequence | Parts | Specific Surface, Angle, edge |
| 1 | Angle | for the most vulnerable Angle. If not, test for 2-3-5 |
| 2 | edge | shortest side of the adjacent test Angle |
| 3 | edge | next longest side of the adjacent test Angle |
| 4 | edge | longest side of the adjacent test Angle |
| 5 | surface | minimum surface |
| 6 | surface | Relative minimum surface |
| 7 | surface | A small plane |
| 8 | surface | Relatively minor surface |
| 9 | surface | The bedding face |
| 10 | surface | Relative maximum |
Details
Product Tags:
|
|
Full Automatic Drop Test Equipment , Single Wing Design Lab Drop Tester Images
|
